Features
 27HP Kohler Confidant commercial grade twin cylinder engine |
 The blade spindles used on the AcrEase mowers are built out of heavy-duty welded steel hubs, 30mm (1-3/16″) steel shafts, machined steel blade holders and large sealed ball bearings. |
 The cutting height can quickly and easily be adjusted from 2″-8″ with the two crank height adjustment system. |
 The main deck is built out of 10 GA (.135″) thick steel with a 3/16″ thick steel top plate for reinforcement. An additional 1/4″ thick steel plate is welded in the blade spindle mounting location. The three layers of steel in the blade spindle mounting area add up to just under 5/8″ thick. |
 Unique twin blade design provides more of a mulch action that reduces the size of the clippings and reduces bunching. |
 The tow bar features a farm clevis type connection. This system provides more degrees of motion than most types of hitching systems. This is necessary to prevent binding in rough uneven terrain. |
 The blades are engaged with an electric clutch which is activated by simply pulling a switch. Electric clutches can extend the life of the belt and reduce overall belt maintenance |
 Large 3-1/4 gallon fuel tank that provides 3 to 3-1/2 hours of run |
Specifications
| Class Mower | Rough Cut (Rear Discharge) |
| Engine Make | OHV Kohler Commercial |
| Engine Model | Confident Twin Cylinder EFI |
| Engine HP | 27 |
| Lubrication Method | Pressure With Filter (Low Oil Pressure Shut-Off Included) |
| Air Filter Type | Cyclonic Air Filtration System |
| Electric Start (Battery not included) | Yes |
| Hour/Tach Meter | Optional |
| Number of Mower Blades | 2-30″ |
| Blade Tip Speed (ft/min) | 19000 |
| Cutting Width | 57″ |
| Cutting Height | 2.0 to 8.0 By Two Cranks |
| Hitch | Direct Behind or Full Offset to Either Side |
| Blade Engagement Clutch | Electric Clutch |
| Deck Metal Thickness | 10 GA (.135″) |
| Deck Top Plate Thickness | Two 1/4″ Thick Plates |
| (Blade Spindle Attachment Area) | |
| Weight | 580 lbs |
| Pneumatic Fixed Rear Tires | 15/600×6, 4 Ply Tubeless (Flat Proof Option Available) |
| Pneumatic Front Tires on Casters | 5.30/4.50×6, 4 Ply Tubeless (Flat Proof Option Available) |
| Fuel Tank Size | 3 Gal. |
| Blade Spindles | |
| Shaft Size | 30 mm (1-3/16″) |
| Bearing # | 6206-2RST |
| Drive Method | 1 B Section “V” Belt (Kevlar) |
| Warranty | 1 Year Commercial |
| Warranty – Engine | 3 Year Commercial |